Mandatory Inclusionary Housing Options, Explained
What are the Mandatory Inclusionary Housing options in NYC?
In a mapped MIH area, new housing must set aside affordable floor area under the options mapped for that area: Option 1 is 25% at a 60% AMI average (with 10% at 40%), Option 2 is 30% at 80%, Option 3 is 20% at 40%, and Option 4 is 30% at 115%, only in combination with another option and never in the Manhattan Core (ZR 27-131). Projects adding no more than 25 units and under 25,000 sq ft may pay into a fund instead, and projects of 10 units and 12,500 sq ft or less on pre-existing lots are exempt but held to the non-MIH FAR. Check whether your lot is in an MIH area, free on Zohgo.
MIH decides how much of a new building in a rezoned area must be affordable, and at what incomes. These are the current numbers, straight from ZR 27-131.
What MIH requires
In a Mandatory Inclusionary Housing (MIH) area, no residential development, enlargement or conversion of non-residential space to housing is allowed unless it provides affordable housing or pays into the affordable housing fund under one of the options in ZR 27-131, unless an exception or a Board of Standards and Appeals special permit applies (ZR 27-131, 73-623). Which options a site can use is not up to the developer: the options are mapped for each MIH area and listed in Appendix F of the Zoning Resolution (ZR 27-131, 27-133).
Percentages are shares of the residential floor area in the MIH development, and incomes are expressed as a percentage of the "income index" (often called AMI).
The options, as ZR 27-131 states them
| Option | Affordable floor area | Weighted average income | Other income rules |
|---|---|---|---|
| Option 1 | At least 25% of residential floor area | Not over 60% of the income index | No more than 3 bands; at least 10% of residential floor area at 40%; no band over 130% |
| Option 2 | At least 30% | Not over 80% | No more than 3 bands; no band over 130% |
| Option 3 | At least 20% | Not over 40% | No more than 3 bands; no band over 130%; no public funding unless HPD finds it supports significant additional affordable housing |
| Option 4 | At least 30% | Not over 115% | No more than 4 bands; no band over 135%; at least 5% at 70% and 5% at 90%; no public funding; only combined with Option 1, 2 or 3; not in the Manhattan Core; expires 10 years after it is mapped or renewed |
| Affordable Housing Fund | Payment instead of units | Not applicable | Only if the project adds no more than 25 dwelling units and less than 25,000 sq ft of residential floor area; amount set by HPD per community district, updated yearly |
Source: ZR 27-131 paragraph (a)(3). A project restricted under an affordable housing regulatory agreement may also satisfy the requirement. On names: the current ZR numbers the options 1 to 4. DCP's MIH dataset still labels some areas "Workforce Option". The current ZR text does not use that name; its Option 4 has the same structure (30% at a 115% average, only paired with another option).
Who is exempt
- Small projects: a single development, enlargement or conversion of no more than 10 dwelling units and no more than 12,500 sq ft of residential floor area, on a zoning lot that existed when the MIH area was established. The catch: such a project is limited to the district's FAR outside MIH areas (ZR 27-131).
- Senior housing: projects with no residences other than affordable independent residences for seniors (ZR 27-131).
- Waivers: projects granted a full waiver, including by BSA special permit (ZR 27-131, 73-623).
- Enlargements: reconstructed residential floor area, and floor area inside units whose layout changes, count as part of the enlargement (ZR 27-131).
Zohgo shows the zoning district, FAR, height and setbacks for any NYC address in about a minute. Free to start, sign in with Google or Apple.
Check any NYC address free on ZohgoHow MIH areas are mapped
MIH areas are created by rezonings: the City Planning Commission and City Council attach one or more options when they significantly increase residential density, and each area with its options is listed in Appendix F (ZR 27-133). MIH also applies through certain special permits, in special purpose districts that define MIH areas, and in some waterfront areas (ZR 27-133). R11, R11A and R12 districts may only be mapped in MIH areas (ZR 21-14).
- The map data: NYC Open Data dataset m79g-k9r4 (Mandatory Inclusionary Housing, published by DCP) held 275 mapped area records on October 27, 2026, all marked adopted, each with its project name, adoption date, ULURP number and option label.
- By borough: Brooklyn 115, Queens 67, Bronx 54, Manhattan 32, Staten Island 6 (one record carries no valid borough code).
- Most common labels: Option 1 alone (97 records), Option 1 and Option 2 (76), and Option 1 and Option 3 (63). Seven records include the Workforce Option.
Records counted with the dataset's API on October 27, 2026 (data last updated May 18, 2026). Check Appendix F or ZoLa for the official status of a specific lot.
MIH vs UAP
MIH is mandatory inside mapped MIH areas. The Universal Affordability Preference (UAP) is the optional bonus for R6 to R12 sites outside MIH areas; a UAP development is by definition outside an MIH area (ZR 27-111). Both count as "qualifying affordable housing", so both unlock the higher FAR column in ZR 23-22 (ZR 12-10). The UAP guide covers UAP's income and distribution rules.
Worked example: set-aside on one lot
A 10,000 sq ft lot in an R7A district inside an MIH area. MIH developments are qualifying affordable housing, so the residential FAR is 5.01 instead of the standard 4.00 (ZR 12-10, 23-22): 10,000 x 5.01 = 50,100 sq ft of residential floor area.
| Option (if mapped here) | Affordable floor area | Deep-affordability floor | Average income cap |
|---|---|---|---|
| Option 1 | 50,100 x 25% = 12,525 sq ft | 50,100 x 10% = 5,010 sq ft at 40% | 60% |
| Option 2 | 50,100 x 30% = 15,030 sq ft | none set | 80% |
| Option 3 | 50,100 x 20% = 10,020 sq ft | whole set-aside averages 40% | 40% |
| Option 4 (with 1, 2 or 3) | 50,100 x 30% = 15,030 sq ft | 2,505 sq ft at 70% and 2,505 sq ft at 90% | 115% |
- Small-lot check: on a 25 x 100 ft lot (2,500 sq ft) in the same area, full MIH would allow 2,500 x 5.01 = 12,525 sq ft. A project of 10 units or fewer would be exempt only if it stays at or under 12,500 sq ft, and it is capped at the outside-MIH FAR of 4.00, or 10,000 sq ft (ZR 23-22, 27-131).
- Fund option: a project adding 20 units and 20,000 sq ft could pay into the fund instead of providing units, since it adds no more than 25 units and less than 25,000 sq ft (ZR 27-131).
Set-asides apply to the residential floor area of the MIH development. Unit distribution, bedroom mix and HPD's administrative rules add further requirements (ZR 27-16).
MIH options FAQ
What is MIH Option 1?
At least 25% of residential floor area must be affordable, at a weighted average of 60% of the income index, with at least 10% of residential floor area at 40% and no band above 130% (ZR 27-131).
What is the deepest MIH option?
Option 3: at least 20% of residential floor area at a weighted average of 40% of the income index, generally without public funding (ZR 27-131).
Is the Workforce Option still available?
The current ZR text does not use the name. Its Option 4 has the same structure: 30% at a 115% average, only combined with Option 1, 2 or 3, not in the Manhattan Core, and expiring 10 years after it is mapped or renewed (ZR 27-131).
Are small buildings exempt from MIH?
A single project of no more than 10 units and 12,500 sq ft of residential floor area, on a zoning lot that existed when the MIH area was created, is exempt, but it is limited to the district's FAR outside MIH areas (ZR 27-131).
Where can I see which MIH options apply to a lot?
Each MIH area and its options are listed in Appendix F of the Zoning Resolution (ZR 27-133), and DCP publishes the areas as NYC Open Data dataset m79g-k9r4.
Can I pay a fee instead of building affordable units?
Only if the project adds no more than 25 dwelling units and less than 25,000 sq ft of residential floor area; the contribution is set by HPD for each community district (ZR 27-131).
Related pages
Sources
Appendix F (MIH areas and their options) is part of the Zoning Resolution; look up a specific area there or on ZoLa.
- ZR 27-131: Mandatory Inclusionary Housing: https://zr.planning.nyc.gov/article-ii/chapter-7/27-131
- ZR 27-133: Mandatory Inclusionary Housing areas: https://zr.planning.nyc.gov/article-ii/chapter-7/27-133
- ZR 27-111: General definitions (UAP development): https://zr.planning.nyc.gov/article-ii/chapter-7/27-111
- ZR 23-22: Floor area regulations for R6 through R12: https://zr.planning.nyc.gov/article-ii/chapter-3/23-22
- ZR 12-10 definitions: qualifying affordable housing: https://zr.planning.nyc.gov/article-i/chapter-2
- ZR 21-14: General residence districts (R11, R11A, R12 only in MIH areas): https://zr.planning.nyc.gov/article-ii/chapter-1/21-14
- NYC Open Data: Mandatory Inclusionary Housing (m79g-k9r4): https://data.cityofnewyork.us/City-Government/Mandatory-Inclusionary-Housing/m79g-k9r4
- NYC DCP: Mandatory Inclusionary Housing dataset page: https://www.nyc.gov/content/planning/pages/resources/datasets/mandatory-inclusionary-housing