ZohgoCheck an address free

Zoning in Bayside, Queens

What is Bayside zoned?

Bayside's most common district is R2A: 4,304 of its 8,639 tax lots (49.8%) are in R2A, based on PLUTO 26v2 lots inside the 2020 NTA boundary. R2A allows a standard residential FAR of 0.75 (ZR 23-21). Check any Bayside address free on Zohgo.

Bayside is half R2A, a single-family district, with R3 and R4 blocks around it.

Tax lots
8,639PLUTO 26v2
Most common
R2A49.8% of lots
Commercial overlay
311lots (3.6%)
Median lot
4,000 sq ftlot area

Bayside is one of the most suburban neighborhoods in the city by zoning. 4,304 of its 8,639 tax lots (49.8%) are R2A, and 8,427 (97.5%) are in R1 through R5 districts overall. The median lot is 4,000 sq ft, roughly double a typical Brooklyn rowhouse lot.

In R1 and R2 districts, including R2A, housing is limited to single-family detached homes unless the lot is a qualifying residential site (ZR 22-122). R3-1 (999 lots), R3X (660) and R4-1 (501) allow one- or two-family homes of specific types. Only a few hundred lots, such as R6B (178), allow apartment buildings by right. PLUTO shows no historic districts and no special districts in this NTA.

Zoning districts in Bayside by tax lot

Zoning district (zonedist1)Tax lotsShareStandard residential FARMax height (standard residences)
R2A4,30449.8%0.75
R3-199911.6%0.7525 ft perimeter wall, 35 ft ridge (pitched-roof envelope)
R3X6607.6%0.7525 ft perimeter wall, 35 ft ridge (pitched-roof envelope)
R4-15015.8%1.0025 ft perimeter wall, 35 ft ridge (pitched-roof envelope)
R4B4585.3%1.00max 25 ft
R44515.2%1.00max 35 ft (25 ft perimeter wall / 35 ft ridge for 1-2 family detached, semi-detached or zero lot line homes)
R23534.1%0.7525 ft perimeter wall, 35 ft ridge (pitched-roof envelope)
R3-22723.1%0.75max 35 ft (25 ft perimeter wall / 35 ft ridge for 1-2 family detached, semi-detached or zero lot line homes)
R1-22693.1%0.75
R6B1782.1%2.00base 30-45 ft, max 55 ft
R3A1081.3%0.7525 ft perimeter wall, 35 ft ridge (pitched-roof envelope)
R4A520.6%1.0025 ft perimeter wall, 35 ft ridge (pitched-roof envelope)
All other districts (2)340.4%
Total8,639100%

Source: PLUTO 26v2, field zonedist1 (the district covering the largest part of each lot), lots inside the 2020 NTA boundary QN1102. FAR and heights are the ZR 23-21 / 23-22 and ZR 23-421 / 23-422 / 23-432 limits for standard residences; qualifying affordable or senior housing can go higher. Commercial districts use their residential equivalent from ZR 34-112.

What the main districts allow

What can you build on your Bayside lot?

Zohgo shows the zoning district, FAR, height and setbacks for any NYC address in about a minute. Free to start, sign in with Google or Apple.

Check any NYC address free on Zohgo

Commercial overlays

311 lots (3.6%) carry a commercial overlay: C1-2 on 157 lots, C2-2 on 143 lots, C2-3 on 11 lots. An overlay sits on top of a residence district and allows local retail and services, usually on the ground floor of avenue and corridor buildings, while the residential rules of the underlying district still apply. For a zoning lot with only commercial use, the overlay FAR is 1.00 where the overlay is mapped in R1, R2, R3-1, R3A or R3X, 1.60 in R3-2, and 2.00 in R4 and every higher residence district (ZR 33-121).

122 lots (1.4%) are split by a district boundary (PLUTO splitzone). On those, each portion follows its own district; see split zoning lots.

Worked example

Take a 4,000 sq ft lot in R2A, close to the neighborhood's median lot size. At the standard FAR of 0.75, the maximum residential floor area is 4,000 x 0.75 = 3,000 sq ft (ZR 23-21). With qualifying residential site rules the FAR is 1.00, so 4,000 x 1.00 = 4,000 sq ft. Unless the lot is a qualifying residential site, R2A is limited to single-family detached residences (ZR 22-122), so the realistic result is one detached house using up to that floor area.

How we counted

We took every tax lot in PLUTO 26v2 (NYC Department of City Planning, August 2026), kept lots whose latitude and longitude fall inside the 2020 Neighborhood Tabulation Area polygon for Bayside (QN1102), and counted the zoning district PLUTO lists first (zonedist1). Lot counts are not land area: one large lot counts the same as a 20-foot rowhouse lot. Zoning maps change through rezonings, so always confirm the district for a specific address.

Bayside zoning FAQ

What is the most common zoning district in Bayside?

R2A. In PLUTO 26v2, 4,304 of the 8,639 tax lots inside the 2020 Bayside NTA boundary (49.8%) have R2A as their main district.

What FAR does R2A allow?

R2A allows a standard residential FAR of 0.75 and 1.00 for qualifying residential sites (ZR 23-21).

What housing can I build on an R2A lot?

Unless the lot is a qualifying residential site, R2A allows only single-family detached residences (ZR 22-122). On qualifying residential sites any type of residence is permitted (ZR 22-122).

What can I build in R3-1 in Bayside?

R3-1 covers 999 Bayside lots in PLUTO 26v2. It allows a standard residential FAR of 0.75, or 1.00 on qualifying residential sites (ZR 23-21), and unless the lot is a qualifying residential site it is limited to single- or two-family detached or semi-detached residences (ZR 22-122).

Do Bayside lots have commercial overlays?

Some do. 311 of the 8,639 lots carry a C1 or C2 overlay in PLUTO 26v2, mostly C1-2 and C2-2. For a lot with only commercial use, the overlay FAR is 1.00 where it is mapped in R1, R2, R3-1, R3A or R3X, 1.60 in R3-2 and 2.00 in R4 and higher districts (ZR 33-121).

Related pages

Sources

Lot counts are our own tabulation of PLUTO 26v2 inside the 2020 NTA boundary, pulled October 27, 2026. PLUTO is updated a few times a year, so counts will drift.