Zoning in Mott Haven, Bronx
What is Mott Haven zoned?
Mott Haven is mostly R6: 1,340 of its 2,319 tax lots (57.8%) are in R6, based on PLUTO 26v2 lots inside the 2020 NTA boundary. R6 allows a standard residential FAR of 2.20 (3.00 within 100 ft of a wide street) (ZR 23-22, ZR 23-432). Check any Mott Haven address free on Zohgo.
Mott Haven is mostly R6, with MX mixed-use and manufacturing lots toward Port Morris.
Mott Haven, in the South Bronx, is mostly R6: 1,340 of the 2,319 tax lots in the 2020 Mott Haven-Port Morris NTA (57.8%). R6 is non-contextual, so its standard FAR is 2.20 on narrow streets and 3.00 within 100 feet of a wide street (ZR 23-22).
The NTA also takes in the Port Morris industrial area, which is why 445 lots (19.2%) carry a plain manufacturing district such as M1-2, M3-1 or M1-3. Another 295 lots are in Special Mixed Use Districts (MX-1, MX-13 and MX-18), mostly paired districts like M1-2/R6A (204 lots) where housing follows the paired residence district (ZR 123-622). PLUTO also tags 24 lots with the Special Harlem River Waterfront District.
Zoning districts in Mott Haven by tax lot
| Zoning district (zonedist1) | Tax lots | Share | Standard residential FAR | Max height (standard residences) |
|---|---|---|---|---|
| R6 | 1,340 | 57.8% | 2.20 (3.00 within 100 ft of a wide street) | base 30-45 ft, max 55 ft (40-65 ft base, 75 ft max within 100 ft of a wide street) |
| M1-2 (manufacturing) | 253 | 10.9% | manufacturing district | |
| M1-2 / R6A (MX pair) | 204 | 8.8% | 3.00 (residential, as R6A) | |
| M3-1 (manufacturing) | 118 | 5.1% | manufacturing district | |
| R7-1 | 112 | 4.8% | 3.44 (4.00 within 100 ft of a wide street) | base 40-65 ft, max 75 ft (base 40-75 ft, max 85 ft within 100 ft of a wide street) |
| M1-3 (manufacturing) | 54 | 2.3% | manufacturing district | |
| C4-4 (commercial) | 52 | 2.2% | 3.44 (4.00 within 100 ft of a wide street) (as R7-2, its residential equivalent) | |
| M1-4 / R7A (MX pair) | 32 | 1.4% | 4.00 (residential, as R7A) | |
| M1-5 / R8A (MX pair) | 26 | 1.1% | 6.02 (residential, as R8A) | |
| R7-2 | 19 | 0.8% | 3.44 (4.00 within 100 ft of a wide street) | base 40-65 ft, max 75 ft (base 40-75 ft, max 85 ft within 100 ft of a wide street) |
| M1-4 (manufacturing) | 19 | 0.8% | manufacturing district | |
| M1-4 / R7X (MX pair) | 18 | 0.8% | 5.00 (residential, as R7X) | |
| All other districts (10) | 72 | 3.1% | ||
| Total | 2,319 | 100% |
Source: PLUTO 26v2, field zonedist1 (the district covering the largest part of each lot), lots inside the 2020 NTA boundary BX0101. FAR and heights are the ZR 23-21 / 23-22 and ZR 23-421 / 23-422 / 23-432 limits for standard residences; qualifying affordable or senior housing can go higher. Commercial districts use their residential equivalent from ZR 34-112. In MX districts the residential side follows the paired R district (ZR 123-622).
What the main districts allow
- R6 (57.8% of lots). Standard residential FAR 2.20 (3.00 within 100 ft of a wide street); 3.90 for qualifying affordable or senior housing (ZR 23-22). Height: base 30-45 ft, max 55 ft (40-65 ft base, 75 ft max within 100 ft of a wide street); qualifying affordable or senior housing max 85 ft (95 ft within 100 ft of a wide street) (ZR 23-432).
- R7-1 (4.8% of lots). Standard residential FAR 3.44 (4.00 within 100 ft of a wide street); 5.01 for qualifying affordable or senior housing (ZR 23-22). Height: base 40-65 ft, max 75 ft (base 40-75 ft, max 85 ft within 100 ft of a wide street); qualifying affordable or senior housing max 105 ft (115 ft within 100 ft of a wide street) (ZR 23-432).
- R7-2 (0.8% of lots). Standard residential FAR 3.44 (4.00 within 100 ft of a wide street); 5.01 for qualifying affordable or senior housing (ZR 23-22). Height: base 40-65 ft, max 75 ft (base 40-75 ft, max 85 ft within 100 ft of a wide street); qualifying affordable or senior housing max 105 ft (115 ft within 100 ft of a wide street) (ZR 23-432).
Zohgo shows the zoning district, FAR, height and setbacks for any NYC address in about a minute. Free to start, sign in with Google or Apple.
Check any NYC address free on ZohgoCommercial overlays
436 lots (18.8%) carry a commercial overlay: C1-4 on 334 lots, C2-4 on 103 lots. An overlay sits on top of a residence district and allows local retail and services, usually on the ground floor of avenue and corridor buildings, while the residential rules of the underlying district still apply. For a zoning lot with only commercial use, the overlay FAR is 1.00 where the overlay is mapped in R1, R2, R3-1, R3A or R3X, 1.60 in R3-2, and 2.00 in R4 and every higher residence district (ZR 33-121).
Special districts
- Special Mixed Use District (MX) (MX-1): 233 lots. Rules in ZR Article XII, Chapter 3 modify the underlying district.
- Special Mixed Use District (MX) (MX-13): 55 lots. Rules in ZR Article XII, Chapter 3 modify the underlying district.
- Special Harlem River Waterfront District (HRW): 24 lots. Rules in ZR Article VIII, Chapter 7 modify the underlying district.
- Special Mixed Use District (MX) (MX-18): 7 lots. Rules in ZR Article XII, Chapter 3 modify the underlying district.
Historic districts
155 lots (6.7%) sit in a designated historic district according to PLUTO, led by Mott Haven East Historic District (68), Mott Haven Historic District (63), Bertine Block Historic District (24). Zoning still sets the envelope, but exterior work on these lots also goes through the Landmarks Preservation Commission, so a lot that zones for more floor area may not be able to use it.
36 lots (1.6%) are split by a district boundary (PLUTO splitzone). On those, each portion follows its own district; see split zoning lots.
Worked example
Take a 2,500 sq ft lot in R6, close to the neighborhood's median lot size. At the standard FAR of 2.20, the maximum residential floor area is 2,500 x 2.20 = 5,500 sq ft (ZR 23-22). With qualifying affordable or senior housing rules the FAR is 3.90, so 2,500 x 3.90 = 9,750 sq ft. For a standard multiple dwelling outside special density areas, the unit cap divides floor area by the dwelling unit factor of 680: 5,500 / 680 = 8.09, which allows 8 units because fractions of 0.75 or more count as a unit (ZR 23-52).
Note that R6 gets a higher standard FAR on lots within 100 feet of a wide street (3.00 within 100 ft of a wide street), so check which street your lot faces.
How we counted
We took every tax lot in PLUTO 26v2 (NYC Department of City Planning, August 2026), kept lots whose latitude and longitude fall inside the 2020 Neighborhood Tabulation Area polygon for Mott Haven (BX0101), and counted the zoning district PLUTO lists first (zonedist1). Lot counts are not land area: one large lot counts the same as a 20-foot rowhouse lot. Zoning maps change through rezonings, so always confirm the district for a specific address.
Mott Haven zoning FAQ
What is the most common zoning district in Mott Haven?
R6. In PLUTO 26v2, 1,340 of the 2,319 tax lots inside the 2020 Mott Haven NTA boundary (57.8%) have R6 as their main district.
What FAR does R6 allow?
R6 allows a standard residential FAR of 2.20 (3.00 within 100 ft of a wide street) and 3.90 for qualifying affordable or senior housing (ZR 23-22).
How tall can a building be in R6?
For standard residences: base 30-45 ft, max 55 ft (40-65 ft base, 75 ft max within 100 ft of a wide street). Qualifying affordable or senior housing: max 85 ft (95 ft within 100 ft of a wide street) (ZR 23-432).
How many apartments fit on a 2,500 sq ft R6 lot?
At FAR 2.20 the lot allows 5,500 sq ft of residential floor area. Divided by the dwelling unit factor of 680 that is 8.09, so 8 units for a standard building outside special density areas, since fractions of 0.75 or more count as a unit (ZR 23-52).
Related pages
Sources
Lot counts are our own tabulation of PLUTO 26v2 inside the 2020 NTA boundary, pulled October 27, 2026. PLUTO is updated a few times a year, so counts will drift.
- NYC Open Data: Primary Land Use Tax Lot Output (PLUTO), version 26v2, queried October 27, 2026: https://data.cityofnewyork.us/d/64uk-42ks
- NYC Open Data: 2020 Neighborhood Tabulation Areas (NTAs): https://data.cityofnewyork.us/d/9nt8-h7nd
- ZR 23-21: Floor area regulations for R1 through R5 Districts: https://zr.planning.nyc.gov/article-ii/chapter-3/23-21
- ZR 23-22: Floor area regulations for R6 through R12 Districts: https://zr.planning.nyc.gov/article-ii/chapter-3/23-22
- ZR 23-432: Height and setback requirements (R6-R12): https://zr.planning.nyc.gov/article-ii/chapter-3/23-432
- ZR 34-112: Residential equivalents in Commercial Districts: https://zr.planning.nyc.gov/article-iii/chapter-4/34-112
- ZR 33-121: Commercial FAR in overlay districts: https://zr.planning.nyc.gov/article-iii/chapter-3/33-121
- ZR 123-622: Residential FAR in MX districts: https://zr.planning.nyc.gov/article-xii/chapter-3/123-622
- ZR Special Mixed Use District (MX): https://zr.planning.nyc.gov/article-xii/chapter-3
- ZR Special Harlem River Waterfront District (HRW): https://zr.planning.nyc.gov/article-viii/chapter-7