ZohgoCheck an address free

Zoning in Greenpoint, Brooklyn

What is Greenpoint zoned?

Greenpoint is mostly R6B: 3,214 of its 4,775 tax lots (67.3%) are in R6B, based on PLUTO 26v2 lots inside the 2020 NTA boundary. R6B allows a standard residential FAR of 2.00 and a maximum height of 55 ft for standard buildings (ZR 23-22, ZR 23-432). Check any Greenpoint address free on Zohgo.

Greenpoint is an R6B neighborhood wrapped by manufacturing and MX-8 mixed-use lots.

Tax lots
4,775PLUTO 26v2
Most common
R6B67.3% of lots
Commercial overlay
717lots (15.0%)
Median lot
2,500 sq ftlot area

Greenpoint's residential core is R6B: 3,214 of 4,775 tax lots (67.3%). Around it sit 529 lots (11.1%) in plain manufacturing districts (M1-1, M3-1, M1-2 and others) and 253 lots (5.3%) in paired M1/R districts such as M1-2/R6A (166) and M1-2/R6B (50).

Those paired lots are part of Special Mixed Use District MX-8, which PLUTO tags on 260 lots. In an MX district the residential side follows the floor area rules of the paired residence district (ZR 123-622), so an M1-2/R6A lot can be planned like R6A for housing.

Zoning districts in Greenpoint by tax lot

Zoning district (zonedist1)Tax lotsShareStandard residential FARMax height (standard residences)
R6B3,21467.3%2.00base 30-45 ft, max 55 ft
M1-1 (manufacturing)2906.1%manufacturing district
R6A2565.4%3.00base 40-65 ft, max 75 ft
R7A2154.5%4.00base 40-75 ft, max 85 ft
M1-2 / R6A (MX pair)1663.5%3.00 (residential, as R6A)
C4-3A (commercial)1463.1%3.00 (as R6A, its residential equivalent)
M3-1 (manufacturing)1362.8%manufacturing district
R61282.7%2.20 (3.00 within 100 ft of a wide street)base 30-45 ft, max 55 ft (40-65 ft base, 75 ft max within 100 ft of a wide street)
M1-2 (manufacturing)962.0%manufacturing district
M1-2 / R6B (MX pair)501.0%2.00 (residential, as R6B)
M1-2 / R6 (MX pair)350.7%2.20 (3.00 within 100 ft of a wide street) (residential, as R6)
R8220.5%6.02 (7.20 within 100 ft of a wide street)base 60-85 ft, max 115 ft (base 60-95 ft, max 135 ft within 100 ft of a wide street)
All other districts (5)210.4%
Total4,775100%

Source: PLUTO 26v2, field zonedist1 (the district covering the largest part of each lot), lots inside the 2020 NTA boundary BK0101. FAR and heights are the ZR 23-21 / 23-22 and ZR 23-421 / 23-422 / 23-432 limits for standard residences; qualifying affordable or senior housing can go higher. Commercial districts use their residential equivalent from ZR 34-112. In MX districts the residential side follows the paired R district (ZR 123-622).

What the main districts allow

What can you build on your Greenpoint lot?

Zohgo shows the zoning district, FAR, height and setbacks for any NYC address in about a minute. Free to start, sign in with Google or Apple.

Check any NYC address free on Zohgo

Commercial overlays

717 lots (15.0%) carry a commercial overlay: C2-4 on 717 lots. An overlay sits on top of a residence district and allows local retail and services, usually on the ground floor of avenue and corridor buildings, while the residential rules of the underlying district still apply. For a zoning lot with only commercial use, the overlay FAR is 1.00 where the overlay is mapped in R1, R2, R3-1, R3A or R3X, 1.60 in R3-2, and 2.00 in R4 and every higher residence district (ZR 33-121).

Special districts

Historic districts

364 lots (7.6%) sit in a designated historic district according to PLUTO, led by Greenpoint Historic District (357), Eberhard Faber Pencil Company Historic District (7). Zoning still sets the envelope, but exterior work on these lots also goes through the Landmarks Preservation Commission, so a lot that zones for more floor area may not be able to use it.

122 lots (2.6%) are split by a district boundary (PLUTO splitzone). On those, each portion follows its own district; see split zoning lots.

Worked example

Take a 2,500 sq ft lot in R6B, close to the neighborhood's median lot size. At the standard FAR of 2.00, the maximum residential floor area is 2,500 x 2.00 = 5,000 sq ft (ZR 23-22). With qualifying affordable or senior housing rules the FAR is 2.40, so 2,500 x 2.40 = 6,000 sq ft. For a standard multiple dwelling outside special density areas, the unit cap divides floor area by the dwelling unit factor of 680: 5,000 / 680 = 7.35, which allows 7 units because fractions of 0.75 or more count as a unit (ZR 23-52).

How we counted

We took every tax lot in PLUTO 26v2 (NYC Department of City Planning, August 2026), kept lots whose latitude and longitude fall inside the 2020 Neighborhood Tabulation Area polygon for Greenpoint (BK0101), and counted the zoning district PLUTO lists first (zonedist1). Lot counts are not land area: one large lot counts the same as a 20-foot rowhouse lot. Zoning maps change through rezonings, so always confirm the district for a specific address.

Greenpoint zoning FAQ

What is the most common zoning district in Greenpoint?

R6B. In PLUTO 26v2, 3,214 of the 4,775 tax lots inside the 2020 Greenpoint NTA boundary (67.3%) have R6B as their main district.

What FAR does R6B allow?

R6B allows a standard residential FAR of 2.00 and 2.40 for qualifying affordable or senior housing (ZR 23-22).

How tall can a building be in R6B?

For standard residences: base 30-45 ft, max 55 ft. Qualifying affordable or senior housing: base up to 45 ft, max 65 ft (ZR 23-432).

How many apartments fit on a 2,500 sq ft R6B lot?

At FAR 2.00 the lot allows 5,000 sq ft of residential floor area. Divided by the dwelling unit factor of 680 that is 7.35, so 7 units for a standard building outside special density areas, since fractions of 0.75 or more count as a unit (ZR 23-52).

Related pages

Sources

Lot counts are our own tabulation of PLUTO 26v2 inside the 2020 NTA boundary, pulled October 27, 2026. PLUTO is updated a few times a year, so counts will drift.